| Material Safety Data Sheet |
|
U.S. Department of
Labor |
|
|
| May be
used to comply with |
|
Occupational Safety
and Health Administration |
|
| OSHA's
Hazard Communication Standard, |
|
(Non-Mandatory Form) |
|
| 29 CFR
1910.1200. Standard must be |
|
Form Approved |
|
| consulted
for specific requirements. |
|
OMB No. 1218-0072 |
|
| IDENTITY (As Used on Label and List) ANDREAE
AF923, AF123, AF223, AF423 |
Note: Blank spaces are not permitted. If any
item is not applicable, or no information is available, the space must be
marked to indicate that. |
|
| Section
I |
|
|
|
| Manufacturer's Name |
Emergency Telephone
Number |
|
|
|
|
| ANDREAE TEAM, INC. |
580-223-9334 |
|
|
|
|
| Address (Number,
Street, City, State, and ZIP Code) |
Telephone Number for
Information |
|
|
|
|
| P.O. BOX 2538 |
580-223-9334 |
|
|
|
|
| 3550 CYPERT
WAY |
Date Prepared: 01/01/07 |
|
|
|
|
| ARDMORE, OK. 73402 U.S.A. |
Signature of Preparer (optional) |
|
|
|
|
| Section
II - Hazard Ingredients/Identity Information |
|
|
|
|
| Hazardous Components (Specific
Chemical Identity; Common Name(s)) |
OSHA PEL |
ACGIH TLV |
Other Limits |
%(optional) |
|
| Recommended |
|
| N/A |
N/A |
N/A |
N/A |
ND |
|
|
| |
|
|
|
|
|
| Section III - Physical/Chemical Characteristics |
|
| |
|
|
|
| Boiling
Point: N/A |
|
Specific Gravity (H2O = 1) |
1.0-1.38 |
|
|
| Vapor Pressure (mm Hg.): N/A |
|
Melting Point |
500 deg. F |
|
|
| |
|
|
| Vapor Density (AIR = 1): N/A |
|
Evaporation Rate |
N/A |
|
|
| (Butyl
Acetate = 1) |
|
|
|
| Solubility in
Water: NO |
|
|
|
|
|
| Appearance and Odor: N/A |
|
|
|
|
|
| Section
IV - Fire and Explosion Hazard Data |
|
|
| Flash Point (Method Used): 350 deg. C |
Flammable Limits: N/A |
LEL:
N/A |
UEL: N/A |
|
|
| Extinguishing
Media: WATER / CARBON DIOXIDE, DRY
CHEMICAL, HALON |
|
|
|
|
| Special
Fire Fighting Procedures: Use self-contained, positive pressure, full face
piece apparatus and full protective gear. |
|
|
| Unusual Fire and Explosion
Hazards: NONE |
|
|
|
|
|
| Section V - Reactivity Data |
|
| Stability |
Unstable |
|
Conditions
to Avoid: N/A |
|
| |
Stable: X |
|
|
|
|
| Incompatibility (Materials to Avoid): Strong oxidizing agents, acids, or alkalis |
|
|
| Hazardous Decomposition or Byproducts: May occur |
|
|
| Hazardous |
|
|
Conditions
to Avoid |
|
|
| Polymerization |
N/A |
|
|
| (Not known to polymerize) |
Will Not Occur X |
|
|
|
|
| Section VI - Health Hazard Data |
|
| Route(s) of Entry: |
Inhalation? None |
Ingestion? No toxic effects
when ingested. |
|
|
|
| N/A |
|
|
|
|
| Health Hazards (Acute and Chronic): NONE KNOWN |
|
irritation which is
readily reversible. |
|
|
| Carcinogenicity: (NONE) |
NTP? N/A |
IARC Monographs? N/A |
OSHA
Regulated? N/A |
|
| Signs and Symptoms of Exposure: NONE KNOWN |
|
|
| Medical Conditions Generally Aggravated by Exposure: NONE KNOWN |
|
|
| Emergency and First Aid Procedures: N/A |
|
|
| Section VII - Precautions for Safe Handling and
Use |
|
| Steps to Be Taken in Case Material is Released or
Spilled: N/A |
|
|
|
|
| Waste Disposal Method: Clean filters can be discarded as
non-hazardous material. Paint impregnated filters must be handled in
accordance with EPA regulations 40 CFR parts 260-262, NAPA Standard #33, OSHA
Regulation 1910, 107, and all local, state, and federal codes. |
|
| Precautions
to Be taken in Handling and Storing: Gloves recommended to guard against edge
cuts. |
|
| Other Precautions: None |
|
|
|
|
|
| Section VIII - Control Measures |
|
| Respiratory Proctection (Specify
Type) |
|
|
|
| Ventilation |
Local Exhaust: Sufficient |
Special: NONE |
|
|
|
| |
Mechanical (General): NONE |
Other: NONE |
|
|
|
| Protective
Gloves: Recommended |
Eye Protection:
Recommended |
|
|
|
|
| Other
Protective Clothing or Equipment: As required if dermititus occurs |
|
|
|
|
| Work/Hygienic Practices Due to variable
conditions which may exist, evaluation of exposure by an Industrial Hygenist
is recommended. |
|
|
* U.S.G.P.O.: 1986 - 491 -
529/45775 |
|
|
|
|
|
|
|
|